RIVER 2
A compact starting point for small electronic loads. Its modest storage makes measuring your actual use especially worthwhile.
- Nominal storage
- 256 Wh
- Continuous AC output
- 300 W
A little light. A charged phone. A fridge that stays on. Find the equipment that fits the way you want to get through an outage.
92 products
As an Amazon Associate I earn from qualifying purchases.
A compact starting point for small electronic loads. Its modest storage makes measuring your actual use especially worthwhile.
More stored energy than the RIVER 2 in the same small-load family. Compare it with your overnight networking and charging schedule.
A step up in both capacity and running output from the smaller RIVER models. Check motor startup separately before assigning it a refrigerator.
A 1 kWh-class station with more continuous output than compact units. Useful to compare when several plug-in essentials share one plan.
Twice the nominal storage of a 1,024 Wh station. Consider it when your device schedule pushes past the smaller size bands.
A larger storage and output class for a more demanding plug-in plan. Think about where it will sit and how you will move it.
A 4 kWh-class station for longer or heavier-load plans. Compare its outlet and voltage configurations as carefully as its storage.
A small power station for a deliberately short device list. Separate phone charging from AC use to understand where its energy will go.
A compact 288 Wh model with AC outlets. Compare it with USB-only backup when your devices do not actually need a household plug.
A mid-compact storage option with a 500 W continuous rating. Energy capacity grows faster than output here, so check both numbers.
Sits just above the 1 kWh mark. A useful comparison for measured household essentials that do not call for a larger inverter.
Adds storage and continuous output compared with the 1000 v2. The similar model name makes checking the full specification important.
A 1.5 kWh-class option between compact backup and the larger 2 kWh models. Work out the required active hours before choosing the extra storage.
Shares a nominal capacity with the 1500 v2 but has a different continuous output rating. Compare the exact model rather than the number alone.
Roughly 2 kWh of storage for a longer essentials schedule. Check how your combined load compares with the continuous AC output.
Similar nominal storage to the 2000 v2 with a higher output rating. This distinction matters when your plan is limited by power rather than energy.
A compact AC-equipped option for a small backup plan. Choose this model only if you need the AC features that the C300 DC omits.
Pairs 768 Wh of storage with more running output than many compact stations. That does not increase the energy available for a long outage.
A 1,056 Wh option with a broad continuous-output range for plug-in essentials. Keep its original model name distinct from the Gen 2.
A different capacity and output combination from the original C1000. Compare the generation explicitly when shopping across retailers.
A 2 kWh-class station for plans that outgrow a compact battery. Verify the intended charging source and the ports your equipment needs.
A large-capacity, high-output system with 120/240 V configurations. Treat outlet limits and installation requirements as separate checks.
A small-capacity AC station for a focused set of electronics. Its storage can be the limiting factor even when the output rating is sufficient.
A 768 Wh station to compare with mid-compact alternatives. Base your runtime plan on actual watt-hours rather than power-lifting claims.
A little more nominal storage than a 1,024 Wh model with the same 1,800 W output class. Measurements show whether that difference matters for your schedule.
A 2 kWh-class model for a longer list of essentials. Include the power station’s own consumption when planning low-wattage overnight loads.
A compact 512 Wh station with a comparatively high output rating. Check the charging accessories you actually need before ordering.
A 1 kWh-class alternative with a higher continuous-output rating than some peers. More output does not mean a longer runtime at the same load.
Combines roughly 2 kWh of storage with a 3,000 W continuous rating. Compare both its size and its connection requirements with your setup.
A small LiFePO4 station with a 350 W AC inverter. A short, measured schedule is more useful here than a long list of possible appliances.
A 499.2 Wh station for modest plug-in loads. Compare it with a UPS if keeping networking equipment uninterrupted is your main priority.
More storage than the Yeti 500, with a 600 W continuous rating. Check whether your plan needs that added energy or a higher-output model instead.
A small portable panel for a compatible low-input setup. Match the connector and input limits before considering the headline wattage.
A folding panel in the roughly 100 W size class. Compare expected placement and charging-window length with your battery-only plan.
A middle ground between smaller folding panels and 200 W-class options. Actual energy collected depends on your conditions.
A bifacial panel with a 220 W front-side rating. Rear-side contribution depends on the surface and installation, so do not assume a fixed bonus.
A larger folding panel for a station that can accept its electrical specifications. Check the space needed to deploy it.
A compact panel for a small, compatible charging setup. It is a recharging accessory rather than a replacement for stored overnight energy.
An 80 W option to compare with smaller and 100 W-class panels. Confirm the supplied cables for your exact power station.
A 100 W portable panel in the Air range. Compare the complete model name when looking at other SolarSaga 100 variants.
Another 100 W SolarSaga option with a distinct design. Check the physical dimensions and the connection kit that comes with the listing.
A 100 W Prime-series panel for a compatible solar-input setup. Compare the mounting approach before choosing between rigid and folding options.
A 200 W portable option when the battery can accept more solar input. Verify the connector and permitted panel configuration.
A larger 500 W panel for an appropriately matched system. Check input limits before assuming its full rated power can be used.
A small panel aimed at light charging needs. Check which device or battery inputs it supports rather than assuming an AC power-station connection.
A bifacial panel in the 100 W front-side class. Ground reflection, placement, and weather influence the energy collected.
A 200 W front-side option to compare with smaller portable panels. Confirm the exact variant because earlier PS200 versions differ.
A larger bifacial portable panel for a compatible higher-input system. Check deployed dimensions and permitted voltage before purchase.
A four-panel folding design for a smaller charging setup. Compare the likely daily collection with what your devices actually consume.
A folding 100 W panel to pair with compatible power equipment. Check whether any adapter or combiner is needed for your arrangement.
A folding 200 W panel for a larger charging window. Make room for the deployed panel as well as the folded storage size.
A 400 W portable panel for systems with suitable solar-input limits. Compare the connector and electrical ratings with the exact station manual.
A charging bank with USB-C and a small AC inverter. The 100 W AC rating sets a very different limit from a household-size power station.
A USB-focused alternative to the Sherpa 100AC. Compare it when your laptop and phone can charge directly over compatible USB-C.
A smaller bank for a phone-and-light charging kit. Keep a suitable cable with it so the backup is useful when you need it.
More stored energy and USB-C output than the Venture 35. Check your laptop’s supported charging profile before assigning it to this bank.
A small USB bank for light charging duties. Its low output is better suited to small devices than modern high-power laptop charging.
A USB bank with more output than the Flip 12. Compare connection types as well as energy needs when packing an older USB charging setup.
A USB-oriented backup with a roughly 99 Wh headline capacity. Compare it with AC power stations only after deciding which ports your devices need.
A larger DC-focused backup for compatible electronics. It separates USB and DC charging needs from the AC inverter in a conventional power station.
A rechargeable lantern for lighting a shared space. Use lower brightness when you want to stretch the battery through a longer evening.
A smaller rechargeable lantern for a table or bedside spot. Compare a dedicated light with running a household lamp from your main station.
A small USB-rechargeable lantern with a flashlight mode. The lantern and flashlight have different maximum brightness ratings.
A collapsible lantern for a small pool of light. USB charging and a built-in solar panel offer different ways to prepare it in advance.
A collapsible lantern with color modes as well as white light. Compare it with the simpler Crush Light if basic illumination is your priority.
A multi-purpose light with spotlight and floodlight options. Think about whether you need a directed beam or light spread across a workspace.
A light that connects to compatible power equipment rather than relying on its own storage battery. Include its draw in the plan for that battery.
A USB light set for spreading small lights around a usable space. Check the set’s power requirements before counting it as a standalone lantern.
A PFC Sinewave UPS for a modest electronics load. Use the runtime curve at the combined watts of your own equipment.
A line-interactive PFC Sinewave option for desktop and networking equipment. Compare runtime and transfer behavior with the devices you need to protect.
A higher-output PFC Sinewave model than the CP1000PFCLCD. The VA increase should not be treated as an equivalent increase in battery Wh.
A 1,000 W-output UPS for a larger electronics load. Check how long it supports your actual load, not just the maximum rating.
A compact standby UPS for a small electronics setup. Identify which outlets have battery backup before connecting essential devices.
A higher-rated standby option than the ST625U. Match both its watt and VA limits to the equipment you intend to connect.
A compact standby UPS with a 370 W output limit. Use a realistic device load when comparing it with other small UPS models.
A small standby UPS for a focused set of electronics. It is a short-interruption candidate rather than a substitute for an all-day energy plan.
A compact AM/FM and NOAA weather-alert radio with several charging options. Test your local weather channel and alert settings in advance.
A weather-alert radio with multiple power sources and a flashlight. Keep it charged before an outage rather than depending on emergency cranking.
A portable weather-alert radio with a backlit display. Compare the controls and charging connections with what your household can use comfortably.
A pocket-size AM/FM weather-alert radio for a small preparedness kit. Check and store the correct replacement batteries with it.
A plug-in meter for observing appliance power and accumulated energy. A representative Wh reading is more useful than guessing from an adapter label.
A plug-in energy meter with cost-estimation functions. Use the energy reading to improve your backup plan rather than treating a cost estimate as runtime.
A Wi-Fi smart plug with energy-monitoring features. Plan to measure your equipment before an outage, while the network and app are available.
A smart plug for app-based energy monitoring. Its continuous-load limit is lower than its peak rating, which is important for longer appliance measurements.
Adds storage to a compatible DELTA system without being a standalone AC station. Verify the supported host model and included expansion cable.
A larger expansion pack for the compatible DELTA Pro system. Check the exact generation before assuming that a similar connector is sufficient.
A 2,048 Wh expansion option in the DELTA 3 Max Plus family. Match it to a specifically supported host rather than another 2 kWh battery.
A smaller expansion option for the RIVER 3 Plus ecosystem. The EB300 product name does not mean the pack contains exactly 300 Wh.
A high-capacity pack for a compatible DELTA Pro Ultra system. It needs the correct host hardware and is outside a simple standalone plug-in purchase.
An expansion pack associated with the original C1000. The C1000 Gen 2 name should not be treated as proof of compatibility.
A larger pack for supported F3800-family systems. Compare the complete host and battery model names before ordering.
An expansion battery for a compatible Yeti PRO setup. It adds storage to the host system and does not replace the host inverter.
Try a broader search or remove a filter. A missing specification is never treated as a match.
We organize manufacturer specifications so you can narrow a long list to a useful shortlist. Check the exact model, outlet limits, and manuals before you buy. Amazon links search for that model; sellers and results can vary.